M-Vision Laser 18K WUXGA (Preliminary)16,000 ANSI / 18,000 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) | Part Number: 118-053 
16,000 ANSI / 18,000 ISO Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) | Part Number: 118-053 | Colour System: | DMD Specification:
| Blue Laser Phosphor + 4-segment colour wheel
Display Type:
| | 1 x 0.96" DarkChip™ DMD™ |
| 1920 x 1200 pixels native, +/- 12° tilt angle
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x10
Fill Factor
87% |
Key Features Video & Graphics Processing
- HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & TopBottom 3D Formats.
- Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
- Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
- Synchronisation of active glasses.
- 3G-SDI with loop-through.
- 24p and 1080p native display.
Geometry Correction
- Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
- Blanking control for custom input window sizing.
- Scaling for fixed aspect ratio screens.
Edge Blending
- Correction for non-active pixels at the edge of the display.
Picture in Picture
- Two sources can be displayed either one within the other (PIP) , or side by side, with the original aspect ratios maintained.
HDBaseT® Interface
- Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
- Allows the projector to be placed up to 100m from source with low cost cabling.
Colour Processing
- Powerful seven-point colour correction for accurate colour matching.
Projector Controller Software
- Intuitive user interface for network control.
- Simultaneous control of user-defined groups of projectors.
- At-a-glance monitoring of projector status.
Projector Automation
- Real-time clock provides daily on/off automation.
Installation
- Integrated stacking mount pins.
- Eye bolts included for easy rigging.
|
Source Compatibility:
| 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort. |
Inputs/Outputs | Video & Computer | Type | Connector | Qty | DisplayPort 1.1a
HDMI 1.4a
3G-SDI in
3G-SDI out
HDBaseT (see LAN) | DisplayPort
HDMI
BNC
BNC
LAN RJ45 | 2
2
1
1
1 |
| Communication & Control | Type | Connector | Qty | 3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger
NOTE: The HDBaseT and LAN ports are not shared. | BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack | 1
1
1
1
1
2 |
3D Formats Supported
| HDTV Formats Supported
| Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom | 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz) | | Computer Compatibility | Bandwidth | | Up to 1920 x 1200 | 165 MHz on analog RGB
165 Megapixels per second on HDMI | | Remote Control | Automation Control | Addressable IR Remote Control, wireless and wired
On-Board keypad | Crestron RoomView® Connected
PJLink Class 1
LAN
RS232
AMX (Device Discovery)
Served web page | | Colour Temperature | Operation | | 3200K to 9300K |  | illumination Type
| Typical illumination Life
| | Laser Light Source | 20,000 hours |
| Lenses | Lens | Part No. | Focus Range
| Lens Shift | | 1.20 - 1.56 : 1 zoom | 117-573 | 1m - 8m | Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame | | 1.50 - 2.00 : 1 zoom | 118-578 | 2m - 12m | Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame | | 2.00 - 4.00 : 1 zoom | 118-588 | 2.5m - 15m | Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame | | 4.00 - 7.00 : 1 zoom | 117-463 | 4m - 42m | Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame |
| Lens Mount | Motorised and programmable shift, zoom and focus. |
| Mechanical Mounting | Orientation | Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet | Table Top or Inverted: Yes
Pointing Up: Yes
Pointing Down: Yes
Roll (Portrait): Yes | | Power Requirements | Power Consumption | | 100 - 240VAC 50/60Hz single phase | Typical 2000W @ 240VAC in Normal mode
Typical 1200W @ 240VAC in ECO mode
Typical 1200W @ 110VAC in Normal mode
Typical 1000W @ 110VAC in ECO modeW | Thermal Dissipation
| Fan Noise
| Typical 4146 BTU/Hour @ 240VAC in Normal mode
Typical 3276 BTU/Hour @ 240VAC in ECO mode
Typical 4334 BTU/Hour @ 110VAC in Normal mode
Typical 3412 BTU/Hour @ 110VAC in ECO mode BTU/Hour | Normal mode: 45 dBA max, 42 dBA typical
Eco mode: 42 dBA max, 39dBA typical | Operating/Storage Temperature
| Operating Humidity
| Operating: 0 to 40C (32 to 104F)
Storage: -20 to 60C (-4 to 140F) | 10% to 90% relative, non-condensing | Weight (Chassis Only)
| Dimensions
| 49 kg
108 lb
| H: 24.8 cm W: 53.0 cm L: 69.5 cm
H: 9.8 in W: 20.9 in L: 27.4 in | Safety & EMC Regulations
| | UL/cUL, CB, CCC, FCC Class 1 , CE, RoHS 2
IEC EN 60825-1 Class 3R Laser Product
IEC EN 62471-5 Risk Group 2 | |
| Accessories | | Accessory | Part No. | Infrared Remote (replacement)
| 117-780 |
*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information. ![]()
 |
